Gas Fireplace Ignition Systems

Direct Vent Fireplace Ignition Systems



Direct Vent Millivolt Ignition



Direct Vent Millivolt IgnitionMillivolt ignition systems use a standing pilot light. This type of ignition system does not require any external power. Millivolt ignitions are also remote ready and can accommodate anything from a simple on/off wall switch to a programable thermostatic remote. The pilot light can be turned off for extended periods of non-use and them re-ignited when needed. Millivolt are the most common ignition type on the market. Be sure to check local code as not all locals allow for standing pilot lights.


Direct Vent Electronic Ignitions



Electronic IgnitionElectronic ignition systems generally require the use of 110v / 120v electricity to operate. This type of ignition system includes intermittent pilot ignitions (power is stepped sown) and direct ignitions (uses direct 110/120v electricity). Electronic ignitions all work in much the same way, once the fire is turned on by the user an electronic signal first turns on the pilot light. After the pilot light is confirmed on the electronic unit then allows for the burner to open. Some electronic ignition units are now including a battery back up system.


RF Millivolt Ignition



RF Millivolt IgnitionThe RF Millivolt Ignition is a proprietary ignition used in some Empire models. This ignition is an millivolt ignition with a battery backup allowing it to run with or without 110v / 120v power. The RF Millivolt Ignition also includes a thermostatic remote that can vary flame height and control the blower.


Signature Command System Ignition



Signature Command System IgnitionThe Signature Command System ignition is a proprietary ignition used in some Monessen models. This ignition is an electronic ignition with a battery backup allowing it to run with or without 110v / 120v power. The Signature Command System is also remote ready with several different remote options to operate multiple different fireplace functions.


Total Signature Command System Ignition



Total Signature Command System IgnitionThe Total Signature Command System ignition is a proprietary ignition used in some Monessen models. This ignition is an electronic ignition with a battery backup allowing it to run with or without 110v / 120v power. The Total Signature Command System includes the SCSACM A/C module which allows for the control of up to three electric components that are used in conjunction with the fireplace. This ignition system also includes a full function touch screen LCD remote control.



Vent Free Fireplace Ignition Systems



Vent Free Millivolt Ignition



Vent Free Millivolt IgnitionMillivolt ignition systems use a standing pilot light. This type of ignition system does not require any external power. Millivolt ignitions are also remote ready and can accommodate anything from a simple on/off wall switch to a programable thermostatic remote. The pilot light can be turned off for extended periods of non-use and them re-ignited when needed. Millivolt are the most common ignition type on the market. Be sure to check local code as not all locals allow for standing pilot lights.


Vent Free Thermostatic Ignition



Vent Free Thermostatic IgnitionThermostatic ignition systems use a standing pilot light. This type of ignition system does not require any external power. Thermostatic ignitions control the fire by either turning the unit on and off or modulating the flame height in order to maintain a preset level. The pilot light can be turned off for extended periods of non-use and them re-ignited when needed. The thermostat for the unit is located inside the fireplace so the unit reads the temperature only within the fireplace.



Log and Burner Set Ignition Systems



Log and Burner Set Match Light Ignition



Log and Burner Set Match Light IgnitionMatch Light Ignitions are just as they sound. This type of ignition requires that the burner be lit manually with either a match, lighter or some other source. Match light units do not have a pilot light and also has no oxygen depletion sensor. Match light log and burner sets are becoming less and less common.


Log and Burner Set Manual Ignition



Log and Burner Set Match Light IgnitionManual Ignitions Use a mechanical or battery operated Piezo ignitor. This type of ignition uses the Piezo to generate a spark and ignite the pilot light. Manual ignition systems include an oxygen depletion sensor on all vent free units for added safety.


Log and Burner Set Millivolt Ignition



Log and Burner Set Millivolt IgnitionMillivolt ignition systems use a standing pilot light. This type of ignition system does not require any external power. Millivolt ignitions are also remote ready and can accommodate anything from a simple on/off wall switch to a programable thermostatic remote. The pilot light can be turned off for extended periods of non-use and them re-ignited when needed. Millivolt vent free log and burner sets include an oxygen depletion sensor. Be sure to check local code as not all locals allow for standing pilot lights.


Log and Burner Set Millivolt Ignition With Remote



Log and Burner Set Millivolt IgnitionMillivolt ignition systems use a standing pilot light. This type of ignition system does not require any external power. Millivolt ignitions with remote include a specialized remote that is designed to control flame height. This type of remote is only available with this ignition type. The pilot light can be turned off for extended periods of non-use and them re-ignited when needed. Millivolt vent free log and burner sets include an oxygen depletion sensor. Be sure to check local code as not all locals allow for standing pilot lights.


Log and Burner Set Intermittent Ignition With Remote



Log and Burner Set Intermittent Pilot Ignition With RemoteIntermittent pilot electronic ignition systems are a battery powered electronic ignition system which include a remote. Intermittent pilot ignitions operate as follows, once the fire is turned on by the user an electronic signal first turns on the pilot light. After the pilot light is confirmed on the electronic unit then allows for the burner to open. Intermittent pilot vent free log and burner sets include an oxygen depletion sensor.




MonessenShop.com by JBS Retail - Copyright © 2024 All Rights Reserved